Illustrated label for SIMPSON 80271; not a product photograph
SIMPSON / Foam cannons

SIMPSON High Pressure Foam Cannon 80271

1,600–4,000 PSI · 1 L bottle · 1/4 in QC.

1,600–4,000 PSI1 L bottle1/4 in QC

The SIMPSON 80271 foam cannon holds 1 L (33 oz) of detergent and clips on with a 1/4 in quick-connect plug. It works with cold-water washers from 1,600 to 4,000 PSI.

As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.

Specifications at a glance

BrandSIMPSON
Model80271
Pressure range1,600 PSI (minimum) to 4,000 PSI
Max temperature140°F (cold water)
Connection1/4 in quick-connect plug, brass fittings
Bottle1 L (33 oz)
AdjustmentsTwist nozzle for spray pattern; top knob for foam thickness

From SIMPSON’s product information. Fields SIMPSON doesn’t state are left out or marked “Verify”.

What to know about the 80271

Who it suits

SIMPSON says it works with most cold-water gas or electric washers from 1,600 to 4,000 PSI. Below 1,600 PSI, expect thin foam.

Warranty

Not stated on SIMPSON's page.

Key features (from SIMPSON)

  • 1 L (33 oz) bottle
  • Twist nozzle to change the spray pattern; top knob sets foam thickness
  • Brass fittings with a 1/4 in quick-connect plug
  • For cold-water washers from 1,600 to 4,000 PSI

Works with (by connection type)

Matched on the connection and rating data on this site. Always check the exact fitting before ordering.

Wands with a 1/4 in quick-connect end

Is it right for you?

Good choice ifyou wash cars, siding, boats or RVs with detergent
Look elsewhere ifyou run a hot-water machine - it is rated for cold water only
Look elsewhere ifyour washer delivers less than 1,600 PSI

Questions about the 80271

Can I use the SIMPSON 80271 with a hot-water pressure washer?

No - SIMPSON rates it for cold water only (up to 140°F).

What pressure does the 80271 foam cannon need?

SIMPSON says at least 1,600 PSI for good foam, up to a maximum of 4,000 PSI.

How do I attach the 80271?

It has a 1/4 in quick-connect plug, so it goes where a 1/4 in quick-connect nozzle would, usually the end of the wand.

What to check before buying

Compatibility is not confirmed for your machine. Check that your washer’s rated pressure is at or below 4,000 PSI, that the connections match at both ends, and that it suits cold-water machines only.

Source and editorial status

Manufacturer reference: SIMPSON product information ↗. Specifications checked 1 November 2026. We have not tested this product.

Check Price on Amazon