DEWALT 4500 PSI Quick Connect Spray Tips DXPA45ST
Size 4 · 4,500 PSI · 1/4 in QC.
The DEWALT DXPA45ST is a five-tip set (0°, 15°, 25°, 40° and soap) with size 4 orifices and 1/4 in quick-connect plugs, rated to 4,500 PSI for hot or cold water. DEWALT pressure washer accessories are made under licence by FNA Group, the company behind SIMPSON.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | DEWALT |
|---|---|
| Model | DXPA45ST |
| Type | Quick-connect spray tip set |
| Orifice size | 4.0 |
| Fitting | 1/4 in quick-connect plug |
| Maximum pressure | 4,500 PSI |
| Water | Hot or cold water (maximum not stated) |
From DEWALT's product page. Anything DEWALT doesn't state is marked as not stated.
What to know about the DXPA45ST
Match the orifice size
Size 4 suits washers whose rating works out to about 4 with the formula GPM × √(4000 ÷ PSI), for example 4.0 GPM at about 4,000 PSI. Too small an orifice pushes pressure above your washer's rating; too large cuts cleaning pressure. Check yours with the nozzle size calculator.
What the five tips do
0° is a pinpoint for stubborn spots, 15° for stripping and hard surfaces, 25° for general cleaning, 40° for gentle rinsing of cars and windows, and the soap tip drops pressure so the detergent injector can draw.
Pressure and water
Rated to 4,500 PSI, hot or cold water (maximum not stated). Your washer must be rated at or below that.
Key features (from DEWALT)
- Five tips: 0°, 15°, 25°, 40° and low-pressure soap
- High-pressure stainless steel tips
- Orifice size 4.0, rated to 4,500 PSI
- Fits standard 1/4 in quick-connect wands
- 90-day limited accessory warranty
Washers that need a size 4 nozzle
- Parts for the SIMPSON PowerShot PS4240 / PS60843 4,400 PSI · 4.0 GPM
Is it right for you?
| Good choice if | your washer is rated 4,500 PSI or less and needs size 4 tips |
|---|---|
| Look elsewhere if | your washer is rated above 4,500 PSI |
| Look elsewhere if | your washer needs a size other than 4 |
Questions about the DXPA45ST
Will the DEWALT DXPA45ST fit my pressure washer?
It fits washers rated up to 4,500 PSI with a 1/4 in quick-connect wand.
Look up your model on our parts by washer pages.
Can I use the DXPA45ST with hot water?
Yes. Hot or cold water (maximum not stated).
Which tip should I start with?
Start with the widest angle that does the job, usually 40° or 25°, and move to narrower tips only for stubborn dirt.
What to check before buying
Source and editorial status
Manufacturer reference: DEWALT product page ↗. Specifications checked 5 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- SIMPSON PowerShot PS4240 / PS60843 Good match
- Generac OneWash 7019 Check first