DEWALT 4500 PSI Turbo Nozzle DXPA45TN
Size 4 · 4,500 PSI · 1/4 in QC.
The DEWALT DXPA45TN is a turbo nozzle with a size 4 orifice and a 1/4 in quick-connect plug, rated to 4,500 PSI (cold water only). It spins a 0° jet to clean concrete and brick faster than a standard tip. DEWALT pressure washer accessories are made under licence by FNA Group, the company behind SIMPSON.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | DEWALT |
|---|---|
| Model | DXPA45TN |
| Type | Turbo nozzle |
| Orifice size | 4.0 |
| Fitting | 1/4 in quick-connect plug |
| Maximum pressure | 4,500 PSI |
| Water | Cold water only |
From DEWALT's product page. Anything DEWALT doesn't state is marked as not stated.
What to know about the DXPA45TN
Match the orifice size
Size 4 suits washers whose rating works out to about 4 with the formula GPM × √(4000 ÷ PSI), for example 4.0 GPM at about 4,000 PSI. Too small an orifice pushes pressure above your washer's rating; too large cuts cleaning pressure. Check yours with the nozzle size calculator.
How a turbo nozzle works
It spins a pinpoint 0° jet in a circle, so it cuts like a 0° tip but covers a wider patch. It is for hard surfaces such as concrete, brick and stone. Keep it off wood, siding, paint and cars, where it can gouge.
Pressure and water
Rated to 4,500 PSI, cold water only. Your washer must be rated at or below that.
Key features (from DEWALT)
- Oscillating jet; DEWALT says it can cut cleaning time in half
- Orifice size 4.0, rated to 4,500 PSI
- Cold water use
- 1/4 in quick-connect plug
- 90-day limited accessory warranty
Washers that need a size 4 nozzle
- Parts for the SIMPSON PowerShot PS4240 / PS60843 4,400 PSI · 4.0 GPM
Is it right for you?
| Good choice if | your washer is rated 4,500 PSI or less and needs a size 4 nozzle |
|---|---|
| Look elsewhere if | your washer is rated above 4,500 PSI |
| Look elsewhere if | you run a hot-water machine |
| Look elsewhere if | your washer needs a size other than 4 |
| Look elsewhere if | you mostly clean wood, siding or vehicles |
Questions about the DXPA45TN
Will the DEWALT DXPA45TN fit my pressure washer?
It fits washers rated up to 4,500 PSI with a 1/4 in quick-connect wand, if your washer needs a size 4 nozzle.
Look up your model on our parts by washer pages.
Can I use the DXPA45TN with hot water?
No. DEWALT lists it for cold water only.
Can a turbo nozzle damage surfaces?
Yes. The spinning 0° jet is aggressive. Use it on concrete, brick and stone, start about 2 ft away and move closer only if needed.
What to check before buying
Source and editorial status
Manufacturer reference: DEWALT product page ↗. Specifications checked 5 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- SIMPSON PowerShot PS4240 / PS60843 Good match
- Generac OneWash 7019 Check first