SIMPSON Universal Turbo Nozzle 80143
Size 3 · 3,600 PSI · 1/4 in QC.
The SIMPSON 80143 is a turbo nozzle with a size 3 orifice and a 1/4 in quick-connect plug, rated to 3,600 PSI (212°f (hot or cold water)). It spins a 0° jet to clean concrete and brick faster than a standard tip. SIMPSON covers it with a 90-day limited accessory warranty.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | SIMPSON |
|---|---|
| Model | 80143 |
| Type | Turbo nozzle |
| Orifice size | 3.0 |
| Fitting | 1/4 in quick-connect plug |
| Maximum pressure | 3,600 PSI |
| Water | 212°F (hot or cold water) |
From SIMPSON's product page. Anything SIMPSON doesn't state is marked as not stated.
What to know about the 80143
Match the orifice size
Size 3 suits washers whose rating works out to about 3 with the formula GPM × √(4000 ÷ PSI), for example 2.5 GPM at about 2,800 PSI. Too small an orifice pushes pressure above your washer's rating; too large cuts cleaning pressure. Check yours with the nozzle size calculator.
How a turbo nozzle works
It spins a pinpoint 0° jet in a circle, so it cuts like a 0° tip but covers a wider patch. It is for hard surfaces such as concrete, brick and stone. Keep it off wood, siding, paint and cars, where it can gouge.
Pressure and water
Rated to 3,600 PSI, 212°f (hot or cold water). Your washer must be rated at or below that.
Key features (from SIMPSON)
- Oscillating jet that cleans faster than a standard nozzle
- Orifice size 3.0, rated to 3,600 PSI
- Hot or cold water up to 212°F
- 1/4 in quick-connect plug
- 90-day limited accessory warranty
Washers that need a size 3 nozzle
- Parts for the SIMPSON MegaShot MSH3125-S 3,200 PSI · 2.5 GPM
- Parts for the SIMPSON PowerShot PS3228-S 3,300 PSI · 2.5 GPM
Is it right for you?
| Good choice if | your washer is rated 3,600 PSI or less and needs a size 3 nozzle |
|---|---|
| Look elsewhere if | your washer is rated above 3,600 PSI |
| Look elsewhere if | your washer needs a size other than 3 |
| Look elsewhere if | you mostly clean wood, siding or vehicles |
Questions about the 80143
Will the SIMPSON 80143 fit my pressure washer?
It fits washers rated up to 3,600 PSI with a 1/4 in quick-connect wand, if your washer needs a size 3 nozzle.
Look up your model on our parts by washer pages.
Can I use the 80143 with hot water?
Yes. 212°F (hot or cold water).
Can a turbo nozzle damage surfaces?
Yes. The spinning 0° jet is aggressive. Use it on concrete, brick and stone, start about 2 ft away and move closer only if needed.
What to check before buying
Source and editorial status
Manufacturer reference: SIMPSON product page ↗. Specifications checked 5 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- SIMPSON MegaShot MSH3125-S Good match
- SIMPSON PowerShot PS3228-S Good match
- Westinghouse WPX3400 Good match
- Generac OneWash 7019 Check first