Illustrated label for DEWALT DXPA50PH; not a product photograph
DEWALT / Replacement hoses

DEWALT 3/8 in. x 50 ft. 5000 PSI Hose DXPA50PH

50 ft · 3/8 in · 5,000 PSI · 3/8 in QC.

50 ft3/8 in5,000 PSI3/8 in QC

The DEWALT DXPA50PH is a 50 ft, 3/8 in pressure washer hose rated to 5,000 PSI, with 3/8 in quick-connect ends, for cold-water gas washers. DEWALT pressure washer accessories are made under licence by FNA Group, the company behind SIMPSON.

As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.

Specifications at a glance

BrandDEWALT
ModelDXPA50PH
TypeReplacement hose
Length50 ft
Inside diameter3/8 in
Connections3/8 in quick-connect socket and plug
Maximum pressure5,000 PSI
WaterCold water up to 140°F

From DEWALT's product page. Anything DEWALT doesn't state is marked as not stated.

What to know about the DXPA50PH

Connections

Both ends are 3/8 in quick connect (plug and socket). It clicks onto machines and guns with 3/8 in quick-connect fittings; an M22 machine needs a pair of adapters.

Size and reach

50 ft of 3/8 in hose. 3/8 in is the professional size: less pressure loss over long runs, at the cost of weight.

Rating

Rated to 5,000 PSI, cold water up to 140°f. Comparable SIMPSON hose: Monster 41028 (3/8 in, 4,500 PSI).

Key features (from DEWALT)

  • 3/8 in x 50 ft replacement or extension hose
  • Polyester and steel-braided inner, polyurethane outer jacket
  • 4 in bend protectors at each end
  • 3/8 in one-piece quick-connect socket and plug
  • Rated to 5,000 PSI, cold water up to 140°F

Washers with matching hose fittings

All washers we've checked

Is it right for you?

Good choice ifyour washer is rated 5,000 PSI or less and uses 3/8 in quick-connect hose fittings
Look elsewhere ifyour washer is rated above 5,000 PSI
Look elsewhere ifyou run a hot-water machine
Look elsewhere ifyour machine uses M22 threads and you don't want adapters

Questions about the DXPA50PH

Will the DEWALT DXPA50PH fit my pressure washer?

It fits washers rated up to 5,000 PSI with 3/8 in quick-connect fittings.

Look up your model on our parts by washer pages.

Can I use the DXPA50PH with hot water?

No. DEWALT lists it for cold water only.

Does a longer hose lose pressure?

A little: every extra foot costs some pressure, and narrower hoses lose more. For homeowner jobs the loss over 25 to 50 ft is small.

What to check before buying

Check rating and fitting. Make sure your washer is rated at or below 5,000 PSI, that you run cold water only and that the connection matches your machine.

Source and editorial status

Manufacturer reference: DEWALT product page ↗. Specifications checked 5 November 2026. We have not tested this product.

Pressure washers this fits

Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.

All washers we've checked

Check Price on Amazon