DEWALT 31 in. 4500 PSI Spray Wand DXPA31SW
4,500 PSI · M22.
The DEWALT DXPA31SW is a 31 in spray wand with an M22 gun end and a 1/4 in quick-connect tip end, rated to 4,500 PSI for cold-water gas pressure washers. DEWALT pressure washer accessories are made under licence by FNA Group, the company behind SIMPSON.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | DEWALT |
|---|---|
| Model | DXPA31SW |
| Type | Spray wand |
| Length | 31 in |
| Gun end | Threaded M22 |
| Nozzle end | 1/4 in quick connect |
| Maximum pressure | 4,500 PSI |
| Water | Cold water only |
From DEWALT's product page. Anything DEWALT doesn't state is marked as not stated.
What to know about the DXPA31SW
Reach
At 31 in it is nearly twice the length of the 16 in lance most homeowner washers ship with, so you can clean low surfaces and the far side of a car without bending.
Connections
It threads onto an M22 gun outlet and takes 1/4 in quick-connect tips at the other end. If your gun uses a quick-connect wand instead, it won't fit without an adapter.
Rating
Rated to 4,500 PSI, cold water only. The SIMPSON 80479 is the same length and rating.
Key features (from DEWALT)
- 31 in long
- Threads onto standard M22 spray-gun connections
- 1/4 in quick-connect end for tips and accessories
- Rated to 4,500 PSI, cold water
- 90-day limited accessory warranty
Washers it suits by rating
- Parts for the SIMPSON MegaShot MSH3125-S 3,200 PSI · 2.5 GPM
- Parts for the SIMPSON MegaShot MS60763-S 3,100 PSI · 2.4 GPM
- Parts for the SIMPSON PowerShot PS3228-S 3,300 PSI · 2.5 GPM
- Parts for the Generac OneWash 7019 3,100 PSI · 2.4 GPM
Is it right for you?
| Good choice if | your washer is rated 4,500 PSI or less and has an M22 gun outlet |
|---|---|
| Look elsewhere if | your washer is rated above 4,500 PSI |
| Look elsewhere if | you run a hot-water machine |
Questions about the DXPA31SW
Will the DEWALT DXPA31SW fit my pressure washer?
It fits washers rated up to 4,500 PSI with an M22 gun outlet.
Look up your model on our parts by washer pages.
Can I use the DXPA31SW with hot water?
No. DEWALT lists it for cold water only.
Is a longer wand worth it?
For low surfaces, cars and decks, yes: less bending. It is heavier at the end, so short jobs are easier with the stock lance.
What to check before buying
Source and editorial status
Manufacturer reference: DEWALT product page ↗. Specifications checked 5 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- SIMPSON MegaShot MSH3125-S Good match
- DEWALT DXPW3300 Check first
- DEWALT DXPW3425 Check first
- Generac OneWash 7019 Check first
- SIMPSON MegaShot MS60763-S Check first
- SIMPSON MegaShot MS61114 Check first
- SIMPSON MegaShot MS61124(-S) Check first
- SIMPSON MegaShot MS61471 / MS61218 / MS61217 Check first
- SIMPSON MegaShot MS61472 / MS61367 / MS61424 / MS61219 / MS61084 Check first
- SIMPSON PowerShot PS3228-S Check first
- SIMPSON PowerShot PS4240 / PS60843 Check first
- SIMPSON PowerShot PS61253 / PS61002-S / PS61201-S Check first
- SIMPSON PowerShot PS61254 / PS61473 Check first
- SIMPSON PowerShot PS61368-S / PS60995-S Check first
- SIMPSON PowerShot PS61474 / PS60869 Check first
- Westinghouse WPX3400 Check first