DEWALT · Parts by washer

Parts that fit the DEWALT DXPW3425

3,400 PSI · 2.5 GPM · 1/4 in M22 hose · size 2.5 nozzle. Which replacement parts match it, which need a check, and which don't fit.

As an Amazon Associate we earn from qualifying purchases. Specs below come from the sources linked in the table; anything the maker doesn't state is marked so.

DXPW3425 specs that decide fit

SpecValueSource
Rated pressure3,400 PSIPower Equipment Direct spec sheet
Rated flow2.5 GPMPower Equipment Direct spec sheet
EngineHonda GX200 (196 cc)Power Equipment Direct spec sheet
PumpAAA triplex plungerPower Equipment Direct spec sheet
Hose1/4 in x 25 ft wire-reinforced, M22Power Equipment Direct spec sheet
GunM22 connectionPower Equipment Direct spec sheet
NozzlesQuick-connect tipsPower Equipment Direct spec sheet

What to know before you buy parts

  • DEWALT has discontinued the DXPW3425 (also sold as 60697), so replacement parts are the main way to keep one running.
  • Its stock 1/4 in hose is a common upgrade point: a 5/16 in MorFlex or the DEWALT DXPA25PH (3,700 PSI) gives more headroom above its 3,400 PSI.

Nozzle size for the DXPW3425

Using the standard formula (nozzle number = GPM × √(4000 ÷ PSI)), 2.5 GPM at 3,400 PSI works out to 2.71, so the nearest standard tip is size 2.5. Work out other ratings with our nozzle size calculator.

Below: 8 good matches, 14 to check first and 20 that don't fit, checked against the 3,400 PSI / 2.5 GPM rating and the connection types above.

Replacement hoses

FitPartWhy
Check firstMorFlex 40225 — 25 ft pressure washer hose5/16 in, rated 3,700 PSI (300 PSI headroom). Thread type matches; confirm the M22 insert size (14 or 15 mm).Check price
Check firstMorFlex 80392 — 40 ft pressure washer hose5/16 in, rated 3,700 PSI (300 PSI headroom). Thread type matches; confirm the M22 insert size (14 or 15 mm).Check price
Check firstMorFlex 40226 — 50 ft pressure washer hose5/16 in, rated 3,700 PSI (300 PSI headroom). Thread type matches; confirm the M22 insert size (14 or 15 mm).Check price
Check firstDEWALT 5/16 in. x 25 ft. 3700 PSI Hose DXPA25PH5/16 in, rated 3,700 PSI (300 PSI headroom). Thread type matches; confirm the M22 insert size (14 or 15 mm).Check price
Not a matchMorFlex 40224 — 25 ft pressure washer hoseRated 3,300 PSI, below the washer's 3,400 PSI.Check price
Not a matchMorFlex 80391 — 30 ft pressure washer hoseRated 3,300 PSI, below the washer's 3,400 PSI.Check price
Not a matchMonster 41113 — 25-foot pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchMonster 41028 — 50-foot pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchMonster 41030 — 100-foot pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchArmor 41114 — 50 ft pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchArmor 41096 — 100-foot pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchMonster 41032 — 150-foot pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchMonster 41034 — 200-foot pressure washer hose3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price
Not a matchDEWALT 3/8 in. x 50 ft. 5000 PSI Hose DXPA50PH3/8 in quick-connect ends; this washer uses M22 threaded fittings.Check price

Spray guns

FitPartWhy
Good matchUniversal Pressure Washer Spray Gun 80147M22 at both ends, rated 3,400 PSI and 8.0 GPM.Check price
Good matchUniversal Pressure Washer Spray Gun with Side Assist Handle 80148M22 at both ends, rated 4,500 PSI. Side handle helps on long jobs.Check price
Good matchDEWALT 4500 PSI Pressure Washer Spray Gun DXPA45SGDEWALT 4,500 PSI gun with side handle: M22 hose and wand connections, rated 4,500 PSI.Check price
Check firstProfessional Pressure Washer Spray Gun 80178Professional hot-water gun (5,075 PSI, 12 GPM) with NPT threads; M22 and quick-connect adapters are included. More gun than most homeowners need.Check price

Wands

FitPartWhy
Check firstUniversal 16-Inch Pressure Washer Wand 8014916 in, rated 3,500 PSI. Needs an M22 gun outlet; the maker doesn't state this washer's gun-to-wand thread.Check price
Check firstUniversal 31-Inch Pressure Washer Wand 8047931 in, rated 4,500 PSI. Needs an M22 gun outlet; the maker doesn't state this washer's gun-to-wand thread.Check price
Check firstDEWALT 31 in. 4500 PSI Spray Wand DXPA31SW31 in, rated 4,500 PSI. Needs an M22 gun outlet; the maker doesn't state this washer's gun-to-wand thread.Check price
Check firstPressure Washing Telescoping Wand 80470Telescopes 6–18 ft, rated 4,000 PSI and 8.0 GPM. Check its quick-connect and M22 adapter against your gun before ordering.Check price
Not a matchProfessional 48-Inch Insulated Pressure Washer Wand 801791/4 in MNPT gun end; it threads into NPT guns such as the 80178, not an M22 gun.Check price

Nozzles

FitPartWhy
Good matchTwinkle Star Pressure Washer Nozzle Tips TWIS005 (Size 2.5)Size 2.5 matches this washer's calculated size of 2.5; rated 4,000 PSI.Check price
Not a matchSIMPSON nozzle set 80145 (size 3.0)Size 3.0; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.
Not a matchSIMPSON nozzle set 80146 (size 4.0)Size 4.0; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.
Not a matchUniversal Turbo Nozzle 80143Size 3; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.Check price
Not a matchUniversal Turbo Nozzle 80144Size 4; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.Check price
Not a matchUniversal 5-N-1 Nozzle 80142Size 3; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.Check price
Not a matchDEWALT 4500 PSI Quick Connect Spray Tips DXPA45STSize 4; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.Check price
Not a matchDEWALT 4500 PSI Turbo Nozzle DXPA45TNSize 4; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.Check price
Not a matchDEWALT 3400 PSI Turbo Nozzle DXPA34TNSize 3; this washer needs about 2.5. A larger orifice than needed cuts cleaning pressure.Check price

Surface cleaners

FitPartWhy
Good matchUniversal 15-Inch Pressure Washer Surface Cleaner 8029915 in, 1,500–3,700 PSI, 2.5+ GPM, 1/4 in quick-connect plug.Check price
Good matchUniversal 16.5-Inch Pressure Washer Surface Cleaner 8062516.5 in, 2,000–4,000 PSI, 2.5+ GPM, 1/4 in quick-connect plug.Check price
Good matchDEWALT 18 in. Surface Cleaner DXPA34SC18 in, up to 3,400 PSI, 1/4 in quick-connect plug. The maker publishes no minimum flow.Check price
Not a matchUniversal 20-Inch Industrial Pressure Washer Surface Cleaner 80182Needs at least 3,450 PSI; this washer makes 3,400 PSI.Check price

Foam cannons

FitPartWhy
Good matchHigh Pressure Foam Cannon 802711,600–4,000 PSI, 1/4 in quick-connect plug, 1 L bottle.Check price
Check firstDEWALT Foam Cannon DWZPWFC75DEWALT foam cannon, 1,000 ml bottle. 1/4 in quick-connect plug; the maker publishes no pressure rating, so confirm it suits 3,400 PSI.Check price

Replacement pumps

FitPartWhy
Check firstOEM Technologies Axial Cam Pump Kit 900293,300 PSI at 2.4 GPM, 3/4 in shaft, M22 outlet. Your washer has a triplex pump; this axial cam pump bolts on but won't last as long.Check price
Check firstAAA AX300 Axial Cam Pump Kit 900523,500 PSI at 2.5 GPM, 3/4 in shaft, M22 outlet. Your washer has a triplex pump; this axial cam pump bolts on but won't last as long.Check price
Check firstAAA Triplex Pump Kit 900363,200 PSI at 2.8 GPM, 3/4 in shaft, M22 outlet. Your washer has a triplex pump; this axial cam pump bolts on but won't last as long.Check price
Check firstAAA Triplex Pump Kit 900373,700 PSI at 2.5 GPM, 3/4 in shaft, M22 outlet. Your washer has a triplex pump; this axial cam pump bolts on but won't last as long.Check price

Similar pressure washers

Washers with the same nozzle size or a close pressure rating, where many of the same parts apply.

How we decide fit

A part is a good match when its pressure rating is at or above 3,400 PSI, its flow range covers 2.5 GPM and its connection matches the washer. “Check first” means the ratings match but one connection detail isn't published or varies between batches, such as M22 insert size. See M22 14 mm vs 15 mm.