DEWALT 5/16 in. x 25 ft. 3700 PSI Hose DXPA25PH
25 ft · 5/16 in · 3,700 PSI · M22.
The DEWALT DXPA25PH is a 25 ft, 5/16 in pressure washer hose rated to 3,700 PSI, with threaded M22 ends, for cold-water gas washers. DEWALT pressure washer accessories are made under licence by FNA Group, the company behind SIMPSON.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | DEWALT |
|---|---|
| Model | DXPA25PH |
| Type | Replacement hose |
| Length | 25 ft |
| Inside diameter | 5/16 in |
| Connections | Threaded M22 |
| Maximum pressure | 3,700 PSI |
| Water | Cold water |
From DEWALT's product page. Anything DEWALT doesn't state is marked as not stated.
What to know about the DXPA25PH
Connections
Both ends are threaded M22, the standard on most homeowner gas washers. M22 comes with a 14 mm or 15 mm insert; check your pump and gun with our M22 14 mm vs 15 mm guide.
Size and reach
25 ft of 5/16 in hose. 5/16 in is a step up from the 1/4 in hose many homeowner washers ship with, with a higher pressure rating.
Rating
Rated to 3,700 PSI, cold water. Comparable SIMPSON hose: MorFlex 40225 (5/16 in, 3,700 PSI).
Key features (from DEWALT)
- 5/16 in x 25 ft replacement or extension hose
- Standard M22 connections
- Rated to 3,700 PSI
- For gas pressure washers
Washers with matching hose fittings
- Parts for the SIMPSON MegaShot MSH3125-S 3,200 PSI · 2.5 GPM
- Parts for the SIMPSON MegaShot MS60763-S 3,100 PSI · 2.4 GPM
- Parts for the SIMPSON PowerShot PS3228-S 3,300 PSI · 2.5 GPM
- Parts for the Generac OneWash 7019 3,100 PSI · 2.4 GPM
Is it right for you?
| Good choice if | your washer is rated 3,700 PSI or less and uses M22 threaded hose fittings |
|---|---|
| Look elsewhere if | your washer is rated above 3,700 PSI |
| Look elsewhere if | you run a hot-water machine |
| Look elsewhere if | your machine uses 3/8 in quick-connect fittings |
Questions about the DXPA25PH
Will the DEWALT DXPA25PH fit my pressure washer?
It fits washers rated up to 3,700 PSI with M22 threaded fittings.
Look up your model on our parts by washer pages.
Can I use the DXPA25PH with hot water?
No. DEWALT lists it for cold water only.
Does a longer hose lose pressure?
A little: every extra foot costs some pressure, and narrower hoses lose more. For homeowner jobs the loss over 25 to 50 ft is small.
What to check before buying
Source and editorial status
Manufacturer reference: DEWALT product page ↗. Specifications checked 5 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- DEWALT DXPW3300 Check first
- DEWALT DXPW3425 Check first
- Generac OneWash 7019 Check first
- SIMPSON MegaShot MS60763-S Check first
- SIMPSON MegaShot MS61114 Check first
- SIMPSON MegaShot MS61124(-S) Check first
- SIMPSON MegaShot MS61471 / MS61218 / MS61217 Check first
- SIMPSON MegaShot MS61472 / MS61367 / MS61424 / MS61219 / MS61084 Check first
- SIMPSON MegaShot MSH3125-S Check first
- SIMPSON PowerShot PS3228-S Check first
- SIMPSON PowerShot PS61253 / PS61002-S / PS61201-S Check first
- SIMPSON PowerShot PS61254 / PS61473 Check first
- SIMPSON PowerShot PS61368-S / PS60995-S Check first
- Westinghouse WPX3400 Check first