Illustrated model label for SIMPSON Monster 41032; not a product photograph
SIMPSON / Monster

SIMPSON Monster 41032 — 150-foot pressure washer hose

150 ft · 3/8 in · 4,500 PSI · cold water.

150 ft3/8 in4,500 PSI

The SIMPSON Monster 41032 is a 150 ft, 3/8 in cold-water pressure washer hose rated to 4,500 PSI, with 3/8 in male quick-connect plug x 3/8 in female quick-connect socket. Long reach for big properties and commercial jobs, between the 100 ft and 200 ft lengths; heavy to coil.

As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.

Specifications at a glance

BrandSIMPSON
Model41032
Hose lineMonster
Length150 ft
Inside diameter3/8 in
Maximum pressure4,500 PSI
Watercold up to 140°F
Connections3/8 in male quick-connect plug x 3/8 in female quick-connect socket

From SIMPSON's product information. Anything SIMPSON doesn't state is marked as not stated.

What to know about the 41032

Who it suits

Long reach for big properties and commercial jobs, between the 100 ft and 200 ft lengths; heavy to coil. 3/8 in is the professional size, used on machines with 3/8 in quick-connect hose fittings. Same 3/8 in, 4,500 PSI Monster hose as the 25 ft 41113, the 50 ft 41028, the 100 ft 41030 and the 200 ft 41034; the 41032 is the 150 ft length.

Connections

Both ends are 3/8 in quick connect (plug one end, socket the other). It clicks straight onto machines and guns with 3/8 in quick-connect fittings; an M22 threaded machine needs a pair of M22-to-3/8 in quick-connect adapters.

Pressure and temperature

Rated to 4,500 PSI and 140°F. Your washer's rated pressure must be at or below that, and it is for cold-water machines only.

Key features (from SIMPSON)

  • Dual-braided steel over polyester for strength
  • Translucent polyurethane outer jacket: non-marring and up to three times more abrasion resistant than rubber
  • 4 in bend protectors at each end
  • Cold water up to 140°F
  • 90-day limited accessory warranty
  • 150 ft x 3/8 in, rated to 4,500 PSI

Works with (by connection type)

Matched on the connection and rating data on this site. Check the exact fitting before ordering.

Accessories that connect at a 3/8 in quick-connect hose end

Comparisons

Is it right for you?

Good choice ifyour washer is rated 4,500 PSI or less and uses 3/8 in quick connect hose fittings
Look elsewhere ifyou run a hot-water machine; this hose is for cold water only
Look elsewhere ifyour washer is rated above 4,500 PSI
Look elsewhere ifyour washer and gun use M22 threads and you don't want adapters

Questions about the 41032

Can I use the SIMPSON 41032 with a hot-water pressure washer?

No. SIMPSON rates it for cold water only, up to 140°F. For hot water, look at an Armor hose (250°F).

Will the 41032 fit my pressure washer?

It fits machines with 3/8 in quick-connect hose fittings rated up to 4,500 PSI. Most homeowner gas washers use M22 threads instead and need adapters.

Check your model on our parts by washer pages.

Is a 150 ft hose too long?

Every extra foot of hose costs a little pressure, and narrower hoses lose more than wider ones. At 100 ft or more, a 3/8 in hose like this one keeps that loss down, but it is heavy to coil.

What to check before buying

Match the hose to your machine. Check that your washer's rated pressure is at or below 4,500 PSI, that the fittings match at both ends, and that you only run cold water.

Source and editorial status

Manufacturer reference: SIMPSON product information ↗. Specifications checked 3 November 2026. We have not tested this product.

Pressure washers this fits

Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.

All washers we've checked

Check Price on Amazon