SIMPSON Monster 41034 — 200-foot pressure washer hose
200 ft · 3/8 in · 4,500 PSI · cold water.
The SIMPSON Monster 41034 is a 200 ft, 3/8 in cold-water pressure washer hose rated to 4,500 PSI, with 3/8 in male quick-connect plug x 3/8 in female quick-connect socket. Very long runs for commercial work such as fleets or buildings; heavy to coil and store.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | SIMPSON |
|---|---|
| Model | 41034 |
| Hose line | Monster |
| Length | 200 ft |
| Inside diameter | 3/8 in |
| Maximum pressure | 4,500 PSI |
| Water | cold up to 140°F |
| Connections | 3/8 in male quick-connect plug x 3/8 in female quick-connect socket |
From SIMPSON's product information. Anything SIMPSON doesn't state is marked as not stated.
What to know about the 41034
Who it suits
Very long runs for commercial work such as fleets or buildings; heavy to coil and store. 3/8 in is the professional size, used on machines with 3/8 in quick-connect hose fittings. Same 3/8 in, 4,500 PSI Monster hose as the 25 ft 41113, the 50 ft 41028, the 100 ft 41030 and the 150 ft 41032; the 41034 is the 200 ft length.
Connections
Both ends are 3/8 in quick connect (plug one end, socket the other). It clicks straight onto machines and guns with 3/8 in quick-connect fittings; an M22 threaded machine needs a pair of M22-to-3/8 in quick-connect adapters.
Pressure and temperature
Rated to 4,500 PSI and 140°F. Your washer's rated pressure must be at or below that, and it is for cold-water machines only.
Key features (from SIMPSON)
- Dual-braided steel over polyester for strength
- Translucent polyurethane outer jacket: non-marring and up to three times more abrasion resistant than rubber
- 4 in bend protectors at each end
- Cold water up to 140°F
- 90-day limited accessory warranty
- 200 ft x 3/8 in, rated to 4,500 PSI
Works with (by connection type)
Matched on the connection and rating data on this site. Check the exact fitting before ordering.
Accessories that connect at a 3/8 in quick-connect hose end
Comparisons
Is it right for you?
| Good choice if | your washer is rated 4,500 PSI or less and uses 3/8 in quick connect hose fittings |
|---|---|
| Look elsewhere if | you run a hot-water machine; this hose is for cold water only |
| Look elsewhere if | your washer is rated above 4,500 PSI |
| Look elsewhere if | your washer and gun use M22 threads and you don't want adapters |
Questions about the 41034
Can I use the SIMPSON 41034 with a hot-water pressure washer?
No. SIMPSON rates it for cold water only, up to 140°F. For hot water, look at an Armor hose (250°F).
Will the 41034 fit my pressure washer?
It fits machines with 3/8 in quick-connect hose fittings rated up to 4,500 PSI. Most homeowner gas washers use M22 threads instead and need adapters.
Check your model on our parts by washer pages.
Is a 200 ft hose too long?
Every extra foot of hose costs a little pressure, and narrower hoses lose more than wider ones. At 100 ft or more, a 3/8 in hose like this one keeps that loss down, but it is heavy to coil.
What to check before buying
Source and editorial status
Manufacturer reference: SIMPSON product information ↗. Specifications checked 3 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- SIMPSON PowerShot PS4240 / PS60843 Good match
- SIMPSON PowerShot PS61474 / PS60869 Good match