DEWALT 4500 PSI Pressure Washer Spray Gun DXPA45SG
4,500 PSI · M22.
The DEWALT DXPA45SG is a 4,500 PSI cold-water spray gun with M22 hose and wand connections, a 360° side handle and a trigger lock, plus a quick-connect hose adapter in the box. DEWALT pressure washer accessories are made under licence by FNA Group, the company behind SIMPSON.
As an Amazon Associate I earn from qualifying purchases. Verify the model and current listing before ordering.
Specifications at a glance
| Brand | DEWALT |
|---|---|
| Model | DXPA45SG |
| Type | Spray gun |
| Wand connection | Threaded M22 |
| Hose connection | Threaded M22, quick-connect hose adapter included |
| Maximum pressure | 4,500 PSI |
| Water | Cold water only |
From DEWALT's product page. Anything DEWALT doesn't state is marked as not stated.
What to know about the DXPA45SG
Connections
The hose inlet and wand outlet are both threaded M22, the standard on most homeowner gas washers. DEWALT includes a quick-connect hose adapter for hoses with quick-connect ends; check it matches your hose plug.
Comfort on long jobs
A 360° side handle lets you hold the gun with two hands, which takes strain off your wrist when you clean for an hour or more.
Rating
Rated to 4,500 PSI, cold water only. That covers nearly every homeowner and light commercial gas washer. Compare it with the SIMPSON 80148, also 4,500 PSI with a side handle.
Key features (from DEWALT)
- 360° rotating side assist handle
- Trigger safety lock-out
- M22 wand connection
- M22 hose connection, quick-connect hose adapter included
- Rated to 4,500 PSI, cold water
- 90-day limited accessory warranty
Washers with M22 hose connections it suits
- Parts for the SIMPSON MegaShot MSH3125-S 3,200 PSI · 2.5 GPM
- Parts for the SIMPSON MegaShot MS60763-S 3,100 PSI · 2.4 GPM
- Parts for the SIMPSON PowerShot PS3228-S 3,300 PSI · 2.5 GPM
- Parts for the Generac OneWash 7019 3,100 PSI · 2.4 GPM
Is it right for you?
| Good choice if | your washer is rated 4,500 PSI or less and uses M22 hose and wand threads |
|---|---|
| Look elsewhere if | your washer is rated above 4,500 PSI |
| Look elsewhere if | you run a hot-water machine |
Questions about the DXPA45SG
Will the DEWALT DXPA45SG fit my pressure washer?
It fits washers rated up to 4,500 PSI with M22 hose and wand threads (quick-connect hoses via the included adapter).
Look up your model on our parts by washer pages.
Can I use the DXPA45SG with hot water?
No. DEWALT lists it for cold water only.
Do I need a 4,500 PSI gun for a 3,000 PSI washer?
No, but a higher rating does no harm and gives headroom. What matters is that the rating is at or above your washer's and the threads match.
What to check before buying
Source and editorial status
Manufacturer reference: DEWALT product page ↗. Specifications checked 5 November 2026. We have not tested this product.
Pressure washers this fits
Checked against each washer's rated pressure, flow and connections. “Check first” means one connection detail isn't published by the maker.
- DEWALT DXPW3300 Good match
- DEWALT DXPW3425 Good match
- Generac OneWash 7019 Good match
- SIMPSON MegaShot MS60763-S Good match
- SIMPSON MegaShot MS61114 Good match
- SIMPSON MegaShot MS61124(-S) Good match
- SIMPSON MegaShot MS61471 / MS61218 / MS61217 Good match
- SIMPSON MegaShot MS61472 / MS61367 / MS61424 / MS61219 / MS61084 Good match
- SIMPSON MegaShot MSH3125-S Good match
- SIMPSON PowerShot PS3228-S Good match
- SIMPSON PowerShot PS61253 / PS61002-S / PS61201-S Good match
- SIMPSON PowerShot PS61254 / PS61473 Good match
- SIMPSON PowerShot PS61368-S / PS60995-S Good match
- Westinghouse WPX3400 Good match
- SIMPSON PowerShot PS4240 / PS60843 Check first
- SIMPSON PowerShot PS61474 / PS60869 Check first